Vortech MP40W GEN 2 Propeller Pump by EcoTech Marine.
****GENERATION 2 PUMPS****
Bracketless Design
The VorTech minimizes the intrusion of equipment in your tank by using a patent pending bracketless design; this allows the motor to be on the outside of the aquarium and uses a magnetic field to transfer torque through the aquarium wall to the propeller located in the water.
No Heat added to the water
Due to the use of high intensity metal halide lighting, inefficient return pumps, and powerheads, many aquarists must resort to expensive equipment or loud fans to keep their water temperature stable. The VorTech induces very little heat into the aquarium because of EcoTech Marine's patent pending magnetically coupled design which transfers motion through the glass, but not heat.
Controllable and Versatile
The VorTech uses the most advanced motor technology available, allowing the water flow rate to be completely controllable. Operating on tanks between 20 and 500 gallons and producing between 100 and 3,000 gallons per hour of flow, the VorTech is the most versatile flow product on the market. The VorTech is designed to operate on gap thickness from 1/8" to 3/4".
Flow
The VorTech produces from 500 to 3,000 gallons per hour of low velocity gentle water current. The flow is so impressive and broad, that it actually creates an undertow along your sand bed. You will notice an equal amount of flow going out of your pump as you will see going back into it! Moreover, because the flow pattern is so wide, there is no reason to direction the flow, simply place the pump on the back or sides of your aquarium and flow will be created throughout the whole tank.
No AC electricity in the aquarium water
The VorTech is safer than existing products because there is no dangerous AC electricity brought into the aquarium. This keeps your fish and corals happy and healthy, while minimizing your own risk of electrocution.
Run-Safe Design
The VorTech is designed to be the safest and most reliable product on the market:
Over-current protection - if the propeller becomes jammed, our microcontroller will sense the problem and shut the motor down to prevent overheating.
Magnetic couple protection - if the VorTech becomes separated into two parts during operation, our microcontroller will sense the separation and cut power to the motor.
Energy Savings
The VorTech moves more water within your aquarium than conventional powerheads, plus you save money by not having to invest in and run a costly chiller.
Low Maintenance
The VorTech is virtually maintenance free. Classic powerheads use an impeller attached to a magnet assembly which needs to be cleaned every few months. The VorTech need only be serviced minimally to replace a simple and economical bearing every few years.
Wave Controller Accessory*
The EcoTech Wave Controller will wirelessly control up to 10 VorTech Propeller Pumps with an intuitive user interface while creating optiomal flow using wave motion algorithms.
Battery Backup Acessory
An IceCap, Inc. battery backup powers the EcoTech Marine VorTech Propeller Pump for up to 24-hours during a power outage emergency.
Wave Modes:
Reef Crest Random Mode- set the potentiometer to your maximum desired speed and the VorTech Wireless Wave Driver automatically randomizes the flow throughout your tank. The pump will vary from one speed to another rapidly to simulate the high-energy conditions of a natural reef crest environment.
Lagoon Random Mode- set the potentiometer to your maximum desired speed and the VorTech Wireless Wave Driver automatically randomizes the flow throughout your tank. The pump will vary slowly from one speed to another to simulate a calmer, lagoonal reef environment.
Synch Pulse Mode- When entered into Synch Pulse Mode, pumps will automatically synch with the master pump to provide pulsing flow throughout the aquarium. The potentiometer is used to adjust the maximum speed and then is used to adjust the frequency. The minimum speed is automatically set to the minimum pump speed to create as strong a pulse as you desire. Other pumps can be placed on the same side of the aquarium as the master pump to create standing waves in your tank.
Anti-Synch Pulse Mode- When entered into Anti-Synch Pulse Mode, pumps will operate inverse to the master pump. Therefor, everytime the master pump is at the maximum speed of the pulse cycle, the slave pumps entered into Anti-Synch Pulse Mode will be at the minimum speed of the pulse cycle, and vice-versa. Place these pumps on the opposite side of the tank as a master pump to create tidal currents within your aquarium.
Specifications:
Flow: 500-3000 gallons per hour
Power Consumption: 12-35 watts
Maximum Motor Temperature: 50-60 degrees Celsius
Aquarium Wall Thickness Range: 3/16”-3/4”
Appropriate Tank Size Range: 20-500+ gallons
Dimensions: Wet Side- 3” diameter by 2.25” long, Dry Side- 3” diameter by 2.25” long
Clearance Needed Behind Aquarium: 3”
|